Sulfur Dioxide Testing Chamber
Model: HJ-YWL
Description
This Chamber is used to test the sulfur dioxide corrosion resistance of industrial components, electronic components, and other industrial product. It's kind of common environmental testing equipment.
Standards: DIN 50018, GB/9789-88
Features & Principle
●Enclosure material: PVC reinforced hardened plastic sheet, smooth and aging resistant, corrosion resistant
●Liner material: PVC plastic board
●Cabinet cover material: high quality imported PVC shock resistance board, easy for observation when testing, water for sealing to avoid out gas escape
●Gas waste discharge system located on the right side of the control cabinet
●PP high temperature resistant board for heating, water trough heating mode, fast temperature rise and uniform temperature
●Equipped with 1pc sulfur dioxide gas slack barrel
●U type Ti alloy high speed electric heating heating tube
●Intelligent high accuracy digital PID MCU
●Gas enter the chamber and mix with the water vapor then generate sulphurous acid corrosion resistant pipe as the gas guide tube
●Over temperature & water lacking
●Fuse free protection switch
●Test running indication
●The waste gas is filtered by activated carbon and sodium carbonate then exhaust to outside
Technical Specifications
Air concentration |
25 ±5 ppm(0.1~1% free adjustment by volume ) |
Temperature range |
25±2 ℃,75±5%RH(with refrigeration system) |
Temp. Range |
40±3℃, 100%RH(no refrigeration system |
Temperature uniformity |
±2 degree C |
Temperature fluctuation |
±0.5degree C |
Timing range |
0-9999 H.M.S(adjustable) |
Ambient temperature |
5 degree C ~+28 degree C |
Ambient humidity |
≤85% |
Power supply |
AC 220V(±10%)V/50HZ |
Temperature sensor |
PT100 |
Sulfur dioxide supply |
Gas cylinder |
Sulfur dioxide concentration |
25±5 ppm, 0.1-1% free adjustment |