The halogen moisture analyzer employs the halogen lamp pyrolysis weight principle, it is a fast moisture detection instrument. While the moisture analyzer measures the weight of the sample, the halogen lamp heating unit and the moisture evaporation channel quickly dry the sample. During the drying process, the moisture analyzer continuously measures and instantly displays the lost moisture content of the sample. After the drying process is completed, the final moisture content is determined and the content value is locked and displayed.
Compared with the oven heating method, the halogen heating can reach the maximum heating power in the shortest time, and the sample is quickly dried at high temperatures. The test results have good consistency with the oven method, and are replaceable, and the detection efficiency is much higher than that of the oven law. Generally, it only takes a few minutes to complete the measurement. It features simple operation, high accurate test, the moisture value, dry value, measurement time, temperature value, and other data are displayed. RS 232 Interface available to connect PC and printer.
Specifications
Model | RMA-105 | RMA-102 | RMA-100 |
Measure range | 110g/5mg | 110g/2mg | 110g/1mg |
Load cell | HM Strain | ||
Pan size | Φ90mm | ||
Balance readout | 5mg | 2mg | 1mg |
Work Temp. | 5℃-35℃ | ||
Heat device | HALOGEN LAMP-1 | HALOGEN LAMP-2 | |
Temp. sensor | PT-100 | ||
Heat Temp. range | 40℃-199℃ | ||
Temp. step | 1℃ | ||
Moisture measure range | 0.00%-100.00% | ||
Moisture content readout | 0.10% | 0.04% | 0.01% |
Dry weight measure range | 100.00%-0.00% | ||
Dry weight readout | 0.10% | 0.04% | 0.01% |
Storage address | 15 nos |
LCD display rapid moisture meter Specifications RMA-100T
Measure Range (g) | 110g |
Readability(g) | 1mg |
Work Temp. | 5℃-35℃ |
Pan Size | Ø90mm |
Heat Source | Halogen Lamp |
Temp. Sensor | PT100 |
Heat Temp. Range | 40℃-199℃, By 1℃ Step |
Temp. rise Step | 1℃ |
Time setup range | 1-99min by 10 s |
Moisture measure Range | 0.00%-100.00% |
Moisture Readability | 0.01% |
Data storage Cap. | 20 |
Power supply | 220V ±15%, 50HZ |
Power | 400W |
Packaging Dimension | 360X490X350mm |
Heat chamber height | 22mm |
Display | 5inch touch screen |
Calibration | External Calibration by standard weight |
Interface | RS232 |
Intelligent automatic rapid moisture meter specifications
Specifications
Mode | RMA-100S | RMA-100SP | RMA-200S | RMA-200SP | ||
Measure Range (g) | 110g | 210g | ||||
Balance readout | 0.001g | 0.001g | ||||
Operating Temp | 5℃-35℃ | |||||
Pan Size | Ø100mm | |||||
Heat Source | Halogen Lamp | |||||
Temp.Sensor | PT 100 | |||||
Temp. Range | 40℃-230℃ | |||||
Temp.Step | 1℃ | |||||
Moisture measure Range | 0.00%-100.00% | |||||
Moisture Readability | 0.01% | |||||
Dry Residual Range | 100.00%-0.00% | |||||
Dry Residual Readability | 0.01% | |||||
ATRO | 100%-999% | |||||
ATRO | 0%-999% | |||||
Temp. Setup | 40℃-230℃ By 1℃ Step | |||||
Time Setup | 1-99min by 10 s | |||||
Data Storage Cap. | 20 | |||||
Number Of History | 20 | |||||
Power supply | Heater | AC 220V ±15%, 50HZ/, 110V±15%, 60HZ,400W | ||||
Balance | AC 220V 50HZ/110V 60HZ | |||||
Mechanical part | Input: AC 220V 50HZ/110V 60HZ | |||||
Host Dimension | 215X195X415mm | |||||
Indicator Dimension | 200X75X135mm | |||||
Operation Height | 275mm | |||||
Heat chamber height | 35mm | |||||
Display | 7 inch touch panel | |||||
Interface | RS232/RJ45/USB | |||||
Communication Mode | Cable | Wireless | Cable | Wireless | ||
Rechargeable Battery | No | 10,000mAh | No | 10,000mAh | ||
Calibration | External Calibration | |||||
Function extend | Customized |