The high-temperature atmosphere furnace can be used in below applications:
for chemical analysis and physical determination in lab; sintering and
dissolution of metals, ceramics; for debinding of electronic components,
powder metallurgy, magnetic materials, quartz materials and other products ,
Pre-firing and firing; heat treatment process of other materials, etc.
The furnace body adopts a double-layer shell structure, high-performance insulation materials, and is equipped with a cooling fan,
so that the surface temperature of the furnace body is lower, which is 60% more energy-efficient than ordinary furnace. The furnace door and furnace top are sealed with high-temperature silicon rubber, which can be pre-evacuated and can be filled with a variety of inert gases.
1. High uniform temperature.
2. Temperature Control Accuracy:±1℃
3. Easy to operate.
4. Over temperature protection and alarm.
5. Good sealing to make sure no leakage.
6. High temperature alloy resistance wire as the heating element, imported polycrystalline
fiber as insulation material.
7.Good insulation performance, durability, high tensile strength, no impurities,
high purity,and better energy saving.
8. Double-layer liner structure with an air gap in the middle, even reaches
the highest temperature, the surface of thefurnace body can still be safely touched without scalding.
Continuous working Temperature
Max.20c/min (Suggest 0~10℃/min)
Inside Chamber Size
200*200*300mm, 300*300*300,300*300*400,other size customized made
Resistance wire with Mo
Double layer steel casting with dual cooling fan
Furnace door and roof use high
temperature silicone rubber seal. With gas inlet and outlet can pass argon, nitrogen and other gases, can pump vacuum.
AC 110-480V, 50/60HZ
PID automatic control via SCR power control
30 steps programmable
One year limited warranty (Consumable parts such as heating elements are not covered by the warranty)