Needle Flame Test Chamber IEC60695

Needle Flame Test Chamber IEC60695

This test chamber is used to simulate the effect of small flames which may result from fault conditions within the equipment, in order to assess the fire hazard of electric products.
Chat Now

Product Details

Model: NFT-02

This test chamber is used to simulate the effect of small flames which may result from fault conditions within the equipment, in order to assess the fire hazard of electric products.  Touch screen operation, gripper controlled by motor, auto movement of Bunsen burner. 


Standards: IEC60695 -11-5,GB/T5169.5-2008,GB4706.1-2005

 

Features  

Programmable touch screen controller+PLC control, highly automation through whole process

Automatic recording of burning time

Automatic recording of test time and generate test report

Automatic testing and independent air extraction

Black background with illumination ≤20Lux

Flame calibration set optional 

 

Specifications 

 Needle burner: Inner hole Φ 0.5mm ± 0.1mm, outer dia. ≤Φ 0.9mm,  length ≥ 35mm

 Burner flame angle: 0- 45°( free adjustment )

 Ignition time: 0-999.9s±0.1s, freely adjustment(flame auto movement) 

 Burning time: 0-999.9s±0.1s, auto recording, manual stop 

 Flame height: 12mm ± 1mm (with height ruler)

 Needle height: >35mm(inner dia. Ф0.5, outer dia. Ф0.9)

 Burning gas: 95% butane gas( bottled liquefied petroleum gas optional)

 Air flow adjustable(precise flow valve)

 Temperature measure range: 0~1000

 Flame temperature rise rate: The time from 100 ℃ ± ℃ to 700 ℃ ± ℃ is within 23.5 seconds ± 1 second

Φ0.5mm (K type) Ni-Cr / Ni-Al wire thermocouple, insulated to ground

Heat transmission copper block:Ф4.0x6.0mm

Burning gas alarm system optional

Overall size:W1160mm×D600mm×H1310(including foot)mm( 0.75CBM or 1CBM SUS enclosure optional)

Test area size: 0.5CBM, L900mm×W590mm×H1050mm, 


Hot Tags: needle flame test chamber iec60695, manufacturers, suppliers, factory, price, buy, for sale

Inquiry

You Might Also Like